|
|
|
|
|
In association with
| View shopping cart |
| 1. |
|
Factory Reconditioned Bostitch U/CPACK300 3-Tool and Compressor Combo Kit from Bostitch Price: $189.99 Customer Review:  This is a great deal for high quality tools. i used it immediately after i got it and it worked perfectly. I would highly reccomend it |
Customer Rating: |
| 2. |
|
Bostitch CPACK300 3-Tool and Compressor Combo Kit from Bostitch Price: $234.99 Customer Review: I purchased this on-line rather because it included the combo kit that I could not find in stores. It has been great. I changed out 7 windows and used this to help replace all of them. The compressor and nailer worked great just like I knew they would. Had an oil spill during from the bad oil bottle... |
Customer Rating: |
| 3. |
|
Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit from Bostitch Price: $47.25 Customer Review: This product worked really well. Way cheaper than renting for the 500 s.f. of flooring I had to do. |
Customer Rating: |
| 4. |
|
Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer from Bostitch Price: $32.99 Customer Review:  This is a good looking tool. The only problem Ive run across is after you use it a few times, the pin that pushes the brad out of the gun gets stuck in the out position. This entails having to loosen the 3 screws on the front of the gun and pushing the pin back up inside the gun.Its too much trouble... |
Customer Rating: |
| 5. |
|
Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer from Bostitch Price: $107.99 Customer Review:  I've owned this pin nailer for about 5 years & found it to be a very good value for the money. It's performed almost flawlessly & has held up well. There have been no repairs required, even though it's been used in a commercial setting & not always treated kindly. The tool is... |
Customer Rating: |
| 6. |
|
Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box from Bostitch Price: $10.39 Customer Review: The nails arrived quickly, were as described, and worked great. I went through 4 boxes without any problems. Much cheaper than at home depot. |
Customer Rating: |
| 7. |
|
Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing from Bostitch Price: $210.63 Customer Review: I'm a general contractor, I use a framing nailer for approx 8000 nails a month (2 cases of plastic coallated on average). I love this gun. I hate this gun. I love this gun, I hate it, .... I own two of these guns. Bought one before the metal connector tip was available. While the first... |
Customer Rating: |
| 8. |
|
Factory-Reconditioned Bostitch U/CPACK3 3-Tool Compressor Combo Kit from Bostitch Price: $159.99 Customer Review: I'm rating this a five star only because it came as promised, after I had to send back the first mislabeled box which contained the 2 pack. Called CPO Bostitch who were great to deal with, sent me out another within four days which to my surprise came in PERFECT condition.(If you go through the... |
Customer Rating: |
| 9. |
|
Bostitch FN1664K 16 Gauge Straight Finish Nailer from Bostitch Price: Too low to display Customer Review: I got this nail gun together with the 18 Ga nail gun for an exterior trim project. This gun has the sturdier gauge nails, but I was not as impressed with the convenience of the loading mechanism. Additionally when it got down to about 5 nails it would no longer shoot as the spring mechanism that... |
Customer Rating: |
| 10. |
|
Bostitch SX150-BHF-2 18-gauge Hardwood Flooring Stapler from Bostitch Price: $239.00 Customer Review: Used this to put down 700sf of flooring and it worked wonderfully. It did jam up once on the last staple before empty, but other than that no problems. Not too bad for 7500 staples. |
Customer Rating: |
| 11. |
|
Bostitch BT1350B-1M 2-Inch 18-Gauge Brads, 1000 per Box from Bostitch Price: $3.98 Customer Review: Bought a reconditioned Bostich nail gun for $30 from Amazon, and have used Bostich brads exclusively with no jams, no problems. Have heard stories about jamming with other makes of nails and brads. |
Customer Rating: |
| 12. |
|
Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer from Bostitch Price: $425.00 Customer Review: While this tool is one of the most expensive I've purchased, its price is only a small percentage of the cost of the flooring being installed. While I did have the option of renting this tool, I chose to purchase it so that I wouldn't be influenced by the "meter is running" thoughts and took my time... |
Customer Rating: |
| 13. |
|
Factory-Reconditioned Bostitch U/MIIIFS 1-1/2-inch to 2-inch Pneumatic Flooring Stapler from Bostitch Price: $291.80 Customer Review: This was advertised as factory reconditioned but it looked and operated brand new. Compared to the prices these staplers are going for used and brand new , this is a bargain. I recommend it. |
Customer Rating: |
| 14. |
|
Bostitch BT1309B 1-Inch 18-Gauge Brads, 3000 per Box from Bostitch Price: $5.79 Customer Review: I am building a series of cabinets and use the Bostitch brads for all the trim. I found that the 1 inch brads are exactly what I need for most of my project. I bought the 2 inch brads but find that most of the projects that I have tackled only require the 1 inch. It took a little bit of time to... |
Customer Rating: |
| 15. |
|
Bostitch BT1855K 18 Gauge Brad Nailer from Bostitch Price: $94.95 Customer Review: I recently picked up this brad nailer to use with the Jac Pac CO2 regulator. The sales guy selling me the Jac Pac tried to sell me a $310 brad nailer because "most other brad nailers will leak too much air" causing the CO2 cartridge to run out of air. I had no intention of spending that much money... |
Customer Rating: |
| 16. |
|
Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer from Bostitch Price: $160.00 Customer Review: I've had this nailer for over a year and I'm happy with it so far. It is light weight, easy to handle, easy to add nails and change nails. I'm not a pro so I haven't beat on it. I've only used on small jobs; but, have gone through a couple thousand nails of varies sizes without any nail ever getting... |
Customer Rating: |
| 17. |
|
Bostitch PN100K Impact Nailer Kit from Bostitch Price: $96.95 Customer Review: Great nailer for Do It Yourselfer. Easily drives 10D to 20D nails for framing work. Fits in tight spaces between joists. I do not do enough framing work to justify purchasing a $300 framing nailer. I got this Palm nailer for $100 two or three years ago. I've used it several times on projects... |
Customer Rating: |
| 18. |
|
Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer from Bostitch Price: $135.61 Customer Review: Worked very well. Put on a 20' x 45' garage roof with no failures. It did have a learning curve - tended to double-nail until I got the feel of it. |
Customer Rating: |
| 19. |
|
Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing from Bostitch Price: $156.20 Customer Review: Have used this nailer for several months now and am very satisified. No trouble finding nails as they are carried at local Home Depot and online from Amazon. Pros: Works very well, no jams yet, for low volume usage a small compressor works ok, nails are available. Cons: hard to use... |
Customer Rating: |
| 20. |
|
Bostitch SX1838K 18 Gauge Narrow Crown Stapler from Bostitch Price: Too low to display Customer Review: I bought this stapler after a disappointment with a "refurbished" older model that would drive both staples and brads. Compared to the older one, the SX1838K was easier to use in terms of putting the staples exactly where I wanted them and particularly for providing good countersinking of the... |
Customer Rating: |
1 - 20 |
|
| Portions © Amazon.com, Inc. |
