|
|
|
|
|
In association with
| View shopping cart |
| 1. |
|
Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer from Bostitch Price: $32.99 Customer Review:  This is a good looking tool. The only problem Ive run across is after you use it a few times, the pin that pushes the brad out of the gun gets stuck in the out position. This entails having to loosen the 3 screws on the front of the gun and pushing the pin back up inside the gun.Its too much trouble... |
Customer Rating: |
| 2. |
|
Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer from Bostitch Price: $107.99 Customer Review:  I've owned this pin nailer for about 5 years & found it to be a very good value for the money. It's performed almost flawlessly & has held up well. There have been no repairs required, even though it's been used in a commercial setting & not always treated kindly. The tool is... |
Customer Rating: |
| 3. |
|
Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing from Bostitch Price: $210.63 Customer Review: I'm a general contractor, I use a framing nailer for approx 8000 nails a month (2 cases of plastic coallated on average). I love this gun. I hate this gun. I love this gun, I hate it, .... I own two of these guns. Bought one before the metal connector tip was available. While the first... |
Customer Rating: |
| 4. |
|
Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing from Bostitch Price: $268.00 Customer Review:  I bought this gun to install Hardie cement siding on my house. I am using stainless steel ring-shank coiled nails. This gun works great and has no issue putting nails in where there are needed. The tip does not mar the siding and allows for precise location of nails. It works great and I have no... |
Customer Rating: |
| 5. |
|
Bostitch PN100K Impact Nailer Kit from Bostitch Price: $96.95 Customer Review: Great nailer for Do It Yourselfer. Easily drives 10D to 20D nails for framing work. Fits in tight spaces between joists. I do not do enough framing work to justify purchasing a $300 framing nailer. I got this Palm nailer for $100 two or three years ago. I've used it several times on projects... |
Customer Rating: |
| 6. |
|
Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer from Bostitch Price: $160.00 Customer Review: I've had this nailer for over a year and I'm happy with it so far. It is light weight, easy to handle, easy to add nails and change nails. I'm not a pro so I haven't beat on it. I've only used on small jobs; but, have gone through a couple thousand nails of varies sizes without any nail ever getting... |
Customer Rating: |
| 7. |
|
Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing from Bostitch Price: $207.91 Customer Review: This product has saved me lots of time. I have not had a single problem with this nail gun. No misfires and the claws on the side really grab the wood. I wish I would have purchased one years ago.I love that the F28WW will shoot both clipped head and round head nails. This makes it very easy to find... |
Customer Rating: |
| 8. |
|
Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer from Bostitch Price: $425.00 Customer Review: While this tool is one of the most expensive I've purchased, its price is only a small percentage of the cost of the flooring being installed. While I did have the option of renting this tool, I chose to purchase it so that I wouldn't be influenced by the "meter is running" thoughts and took my time... |
Customer Rating: |
| 9. |
|
Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer from Bostitch Price: $212.75 Customer Review:  The main reason I started buying Bostitch tools last year was for the 7 yr warranty. Now I know why they have to offer it. I bought a floor nailer--broke the first time I used it. I bought a coil siding nailer. It's still working OK... only been about 18 months and I don't use it much. Bought a... |
Customer Rating: |
| 10. |
|
Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler from Bostitch Price: $410.00 Customer Review: The Stapler worked great, only had to hit down on the trigger once with the hammer that came with it. Used 2" long Bostitch staples every 8 to 12 inches and it made the job easy. |
Customer Rating: |
| 11. |
|
Bostitch LHF97125-2 Floor Runner Laminated Hardwood Flooring Stapler for 1/4-inch to 1/2-inch Flooring from Bostitch Price: $220.00 Customer Review: Great tool right out of the box. But do yourself a favor and get the Bostitch staples !!! |
Customer Rating: |
| 12. |
|
Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer from Bostitch Price: $74.99 Customer Review: In addition to the other criticisms of this tool, the nose is assembled in such a way that clearing jams is a big pain. Three hex socket screws have to be removed and the nose safety, depth adjustment assembly, and nose safety/depth adjustment cover taken off before the nose plate can be removed to... |
Customer Rating: |
| 13. |
|
Bostitch N80CB-1 Round Head 1-1/2 to 3-1/4-Inch Coil Framing Nailer from Bostitch Price: $239.99 Customer Review: I bought this nailer becuase I was doing a radiant flooring project where I had to pound in 10,000 nails. The nailer worked flawlessly and was a pleasure to use. I did buy Bostitch brand nails after reading the negative reviews about the Chinese imports. I found a great place to buy my nails:... |
Customer Rating: |
| 14. |
|
Bostitch SB-1850BN 18-Gauge Brad Nailer from Bostitch Price: $74.00 Customer Review: I am a home owner and built my own house 25 years ago. At that time I used the old hammer. Since last Oct. i have been remolding my house and have gone to air Nailers and the 1850 is a time saver. If your painting the trim ... no need to putty the holes.... I would buy it again if I had to. |
Customer Rating: |
| 15. |
|
Bostitch BT125 5/8-Inch to 1-1/4-Inch 18 Gauge Brad Nailer from Bostitch Price: $79.95 Customer Review: I have various Bostitch nailers and they all work flawlessly. They are all light weight, strong and do what I need them to do, when I need it. |
Customer Rating: |
| 16. |
|
Bostitch SX150K-1 18 Gauge 1/2-Inch to 1-1/2-Inch Narrow Crown Stapler from Bostitch Price: $103.27 Customer Review: Bought the newer version of this stapler, model # SX1838K, after reading the reviews on the SX150K. Still a good stapler, but like the reviewer who preferred USA made tools, so do I. Is now made in China. It's a shame these big companies do not care what the customers want. It was my fault for not... |
Customer Rating: |
| 17. |
|
Bostitch BT200K-2 18 Gauge 5/8-inch to 2-inch Brad Nailer from Bostitch Price: $82.99 Customer Review:  Bought this gun specifically to shoot 2" nails on a wainscote project. What a mistake! I tried using some 2" nails I found at the local Harbor Freight, and when I saw the terrible results I ordered some 2" Bostitch nails from Amazon. Paid extra to have them "life-flighted" in the next day. Even when... |
Customer Rating: |
| 18. |
|
Bostitch 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler from Bostitch Price: $374.95 Customer Review: The Bostitch 650S4 is indeed top of the line. I've been using it to install OSB decking on a roof and have been very well satisfied with it. I have not had a jam with it and it will sink the staples to the correct depth as long as the air pressure holds up. Easy to use and to load, much better... |
Customer Rating: |
| 19. |
|
Bostitch MIII812CNCT 9/16-to-2-1/4-Inch Industrial Concrete Nailer from Bostitch Price: $325.00 Customer Review: First, these sell at Home Depot for $386 and ebay for cheaper. Most commercial framers will tell you this is a must have tool. I prefer it over a Trac Fast gun. Attach wood and metal (hat channel) furring strips to concrete. Use it to attach plywood subfloor down prior to laying your hardwood floor... |
Customer Rating: |
| 20. |
|
Bostitch SB150SLBC-1 3/4-Inch to 1-1/2-Inch Cap Stapler Kit from Bostitch Price: $189.00 Customer Review: I bought my stapler used to build a garage. I'm a Mechanical engineer by day, so this review is targeted at the weekend warrior who likes having the right tools for the right job. What I like. -It takes a good tug to tear tar paper or house wrap. The caps are not flat but slightly... |
Customer Rating: |
1 - 20 |
|
| Portions © Amazon.com, Inc. |
