|
|
|
|
|
In association with
| View shopping cart |
| 1. |
|
Hitachi C10FCE2 10-Inch Compound Miter Saw from Hitachi Price: $109.95 Customer Review:  This is a great saw for a good price. It has a lot of features, and with some add-ons you get decent functionality for not a lot of clams. It makes nice, clean cuts, and has plenty of power for most tasks that you would expect a saw in this price range to perform. The table is smallish, to cut... |
Customer Rating: |
| 2. |
|
Oshlun SBNF-100100 10-Inch 100 Tooth TCG Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals from Oshlun Price: Too low to display Customer Review:  This blade was purchased to be used in a miter saw to cut DecKorators aluminium tube balasters. The tubes were cut cleanly and smoothly with no tearing or spinning. I forgot to change the blade to a carbide tip 30 tooth, which I had been using to cut ipe, and made several cuts in 2 X 1.5" ipe. The... |
Customer Rating: |
| 3. |
|
MSA Safety Works 817893 Adjustable Faceshield from MSA Safety Works Price: $9.45 Customer Review: this is a good face shield for the homeowner, I actually bought two of them, at just over $12 the price was too good to pass up, but it is not industrial quality, the headband is a bit flimsy, but you do get what you pay for, to get an industrial grade face shield you will have to pay much more, for... |
Customer Rating: |
| 4. |
|
MK Morse CSM1052TSC Metal Devil 10-Inch 52-Teeth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor from MK Morse Price: $59.62 Customer Review: I put this blade on a miter saw to cut some angle iron and bar stock pieces. It cut it like it was cutting through wood - fast clean cuts. It still looks sharps after about 20 cuts in metal. It's a little expensive for a blade you don't use very often, but when you do use it it's worth the money. A... |
Customer Rating: |
| 5. |
|
GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends from GoodYear Price: $19.99 Customer Review:  We bought a Fixer-upper, my wife and I, and as a recently retired residential designer, I returned to my earliest occupation-- arough carpenter. A lot has changed since the 70's I still had my 20 oz hammer but I was dismayed at how those little muscle skills had disappeared so I bought a little job... |
Customer Rating: |
| 6. |
|
Dewalt DPG54-1C Protector Clear High Performance Lightweight Protective Safety Glasses with Wraparound Frame from DEWALT Price: $1.47 Customer Review: You can wear these all day. They are light, fit snugly, and are good protection. |
Customer Rating: |
| 7. |
|
DEWALT DC9096-2 18-Volt XRP 2.4 Amp Hour NiCad Pod-Style Battery, 2 Pack from DEWALT Price: Too low to display Customer Review: I received the pair of batteries, charged them both and they worked as good as when my drill was new 5 years ago. They both hold the charge for days. I did later find them at Home Depot for $10 less - and I don't believe it was a sale. They used to be about $80 a piece at Ace Hardware. Prof. B |
Customer Rating: |
| 8. |
|
Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit from Makita Price: $262.31 Customer Review: I've been using these for the past month remodeling our house, and the drill and impact have plenty of power and are SUPER light-weight. The light even came in handy a few times. |
Customer Rating: |
| 9. |
|
Transcend 8 GB Class 6 SDHC Flash Memory Card TS8GSDHC6E from TRANSCEND Price: $20.00 Customer Review: Product was good, cheap price for the amount of storage. Crapped out after only about a year of use. These things happen with flash memory but will probably go with a better brand next time. |
Customer Rating: |
| 10. |
|
CMT 191.008.11 1/4-Inch Diameter, 1-Inch Cut, 1/4-Inch Shank Upcut Spiral Router Bit from CMT Price: $19.35 Customer Review: I do a lot of woodworking, some for pleasure, some for business. After about a year of using old and inferior bits (hand me downs from my Dad) I broke down and bought a handful of these bits when they were on sale for $10 thinking that they'd last a little while and for the price I could just toss... |
Customer Rating: |
| 11. |
|
Hitachi C10FCE2 10-Inch Compound Miter Saw from Hitachi Price: $109.95 Customer Review: This is a great saw for a good price. It has a lot of features, and with some add-ons you get decent functionality for not a lot of clams. It makes nice, clean cuts, and has plenty of power for most tasks that you would expect a saw in this price range to perform. The table is smallish, to cut... |
Customer Rating: |
| 12. |
|
Oshlun SBNF-100100 10-Inch 100 Tooth TCG Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals from Oshlun Price: Too low to display Customer Review: This blade was purchased to be used in a miter saw to cut DecKorators aluminium tube balasters. The tubes were cut cleanly and smoothly with no tearing or spinning. I forgot to change the blade to a carbide tip 30 tooth, which I had been using to cut ipe, and made several cuts in 2 X 1.5" ipe. The... |
Customer Rating: |
| 13. |
|
MSA Safety Works 817893 Adjustable Faceshield from MSA Safety Works Price: $9.45 Customer Review: this is a good face shield for the homeowner, I actually bought two of them, at just over $12 the price was too good to pass up, but it is not industrial quality, the headband is a bit flimsy, but you do get what you pay for, to get an industrial grade face shield you will have to pay much more, for... |
Customer Rating: |
| 14. |
|
MK Morse CSM1052TSC Metal Devil 10-Inch 52-Teeth Thin Steel Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor from MK Morse Price: $59.62 Customer Review: I put this blade on a miter saw to cut some angle iron and bar stock pieces. It cut it like it was cutting through wood - fast clean cuts. It still looks sharps after about 20 cuts in metal. It's a little expensive for a blade you don't use very often, but when you do use it it's worth the money. A... |
Customer Rating: |
| 15. |
|
GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends from GoodYear Price: $19.99 Customer Review: We bought a Fixer-upper, my wife and I, and as a recently retired residential designer, I returned to my earliest occupation-- arough carpenter. A lot has changed since the 70's I still had my 20 oz hammer but I was dismayed at how those little muscle skills had disappeared so I bought a little job... |
Customer Rating: |
| 16. |
|
Dewalt DPG54-1C Protector Clear High Performance Lightweight Protective Safety Glasses with Wraparound Frame from DEWALT Price: $1.47 Customer Review: You can wear these all day. They are light, fit snugly, and are good protection. |
Customer Rating: |
| 17. |
|
DEWALT DC9096-2 18-Volt XRP 2.4 Amp Hour NiCad Pod-Style Battery, 2 Pack from DEWALT Price: Too low to display Customer Review: I received the pair of batteries, charged them both and they worked as good as when my drill was new 5 years ago. They both hold the charge for days. I did later find them at Home Depot for $10 less - and I don't believe it was a sale. They used to be about $80 a piece at Ace Hardware. Prof. B |
Customer Rating: |
| 18. |
|
Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit from Makita Price: $262.31 Customer Review: I've been using these for the past month remodeling our house, and the drill and impact have plenty of power and are SUPER light-weight. The light even came in handy a few times. |
Customer Rating: |
| 19. |
|
Transcend 8 GB Class 6 SDHC Flash Memory Card TS8GSDHC6E from TRANSCEND Price: $20.00 Customer Review: Product was good, cheap price for the amount of storage. Crapped out after only about a year of use. These things happen with flash memory but will probably go with a better brand next time. |
Customer Rating: |
| 20. |
|
CMT 191.008.11 1/4-Inch Diameter, 1-Inch Cut, 1/4-Inch Shank Upcut Spiral Router Bit from CMT Price: $19.35 Customer Review: I do a lot of woodworking, some for pleasure, some for business. After about a year of using old and inferior bits (hand me downs from my Dad) I broke down and bought a handful of these bits when they were on sale for $10 thinking that they'd last a little while and for the price I could just toss... |
Customer Rating: |
1 - 20 |
|
| Portions © Amazon.com, Inc. |
