|
|
|
|
|
In association with
| View shopping cart |
| 1. |
|
Grizzly H5357 10 Pack 4" Wire Hose Clamps from Grizzly Price: $5.95 Customer Review:  Clamps are great. Small issues with a few but nothing unexpected. That is until you realize that the standard shipping alone is more than the product cost. $7.70 to standard ship a $6.99 product? This bear bites!! READ THE FINE PRINT FIRST..... |
Customer Rating: |
| 2. |
|
PSI Woodworking DBGULP Big Gulp Dust Hood from PSI Woodworking Price: $15.72 Customer Review:  For $16 it works well to capture a lot of dust and increasing the intervals before needing to vacuum up the work area. There are complete miter saw enclosures but they cost 20 times as much and take longer to set up and take down. I view dust collection as a health item as the more dust is sucked... |
Customer Rating: |
| 3. |
|
Jet JW1044 4-to-2-1/2-Inch Reducer from JET Price: $1.29 Customer Review:  What can I say. It does the job it was intended for. Nice heavy plastic. |
Customer Rating: |
| 4. |
|
Woodstock W1044 4-to-2-1/2-Inch Reducer from WOODSTOCK Price: $1.29 Customer Review:  Combined with a "plumbing-dept" rubber pipe connector, these work well for all my shop tools. The plumber connectors are the key as they are available for every standard size port you might need. They come as 2:2 or 2.5:2 or 2:3.0 etc. They use a clamp on each end so the ports are tight and right.... |
Customer Rating: |
| 5. |
|
Jet JW1019 4-Inch Splice from JET Price: $9.99 Customer Review: I used this fitting as a component of a Dust Collection box for my radial arm saw. It was very sturdy as I had expected since it was a Jet product. And for the price I paid I think it was a really great bargain. |
Customer Rating: |
| 6. |
|
Jet JW1015 4-Inch Y-Fitting Dust Hose Connector from JET Price: $3.99 Customer Review: Simple 4 inch black plastic Y. It works well and is built well and should last many years. |
Customer Rating: |
| 7. |
|
Jet JW1007 4-Inch Blastgate from JET Price: $3.99 Customer Review:  I'm an occasional woodworker and currently replacing all 5 of my Jet blast gates - typical reasons...they clog with dust and therefore can't be fully closed. 2 of mine have also come apart (the front panel piece came unglued). This product is a lemon. |
Customer Rating: |
| 8. |
|
Woodstock W2032 4-Inch by 20-Foot Clear Hose from WOODSTOCK Price: $31.95 Customer Review: If you are looking for a good quality, relatively flexible dust collector hose, this is it. The plastic is durable and easily fits over standard 4" vacuum connections. I have a Dewalt planer, Delta joiner and Rigid table saw and had no problems sliding the hose over any of them. One note, if you are... |
Customer Rating: |
| 9. |
|
PSI Woodworking D50C 4-Inch by 50-Feet Clear Flexible Dust Collection Hose from PSI Woodworking Price: $55.44 Customer Review: I don't know what all of the negative reviews are all about. This hose isn't the thickest hose on the market but it doesn't puncture that easy either. I haven't had any problem with this hose and doubt I will. And the price is just too good to pass up. |
Customer Rating: |
| 10. |
|
DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector from Delta Price: $699.99 Customer Review: Well, now that this collector is up and running, it works as well as I had hoped. However, a word of caution: apparently there are a number of these units on the market at about $100 less than the lower prices through other retailers (which is why I bought it through Amazon). My 50-760 arrived a bit... |
Customer Rating: |
| 11. |
|
Grizzly H5357 10 Pack 4" Wire Hose Clamps from Grizzly Price: $5.95 Customer Review: Clamps are great. Small issues with a few but nothing unexpected. That is until you realize that the standard shipping alone is more than the product cost. $7.70 to standard ship a $6.99 product? This bear bites!! READ THE FINE PRINT FIRST..... |
Customer Rating: |
| 12. |
|
PSI Woodworking DBGULP Big Gulp Dust Hood from PSI Woodworking Price: $15.72 Customer Review: For $16 it works well to capture a lot of dust and increasing the intervals before needing to vacuum up the work area. There are complete miter saw enclosures but they cost 20 times as much and take longer to set up and take down. I view dust collection as a health item as the more dust is sucked... |
Customer Rating: |
| 13. |
|
Jet JW1044 4-to-2-1/2-Inch Reducer from JET Price: $1.29 Customer Review: What can I say. It does the job it was intended for. Nice heavy plastic. |
Customer Rating: |
| 14. |
|
Woodstock W1044 4-to-2-1/2-Inch Reducer from WOODSTOCK Price: $1.29 Customer Review: Combined with a "plumbing-dept" rubber pipe connector, these work well for all my shop tools. The plumber connectors are the key as they are available for every standard size port you might need. They come as 2:2 or 2.5:2 or 2:3.0 etc. They use a clamp on each end so the ports are tight and right.... |
Customer Rating: |
| 15. |
|
Jet JW1019 4-Inch Splice from JET Price: $9.99 Customer Review: I used this fitting as a component of a Dust Collection box for my radial arm saw. It was very sturdy as I had expected since it was a Jet product. And for the price I paid I think it was a really great bargain. |
Customer Rating: |
| 16. |
|
Jet JW1015 4-Inch Y-Fitting Dust Hose Connector from JET Price: $3.99 Customer Review: Simple 4 inch black plastic Y. It works well and is built well and should last many years. |
Customer Rating: |
| 17. |
|
Jet JW1007 4-Inch Blastgate from JET Price: $3.99 Customer Review: I'm an occasional woodworker and currently replacing all 5 of my Jet blast gates - typical reasons...they clog with dust and therefore can't be fully closed. 2 of mine have also come apart (the front panel piece came unglued). This product is a lemon. |
Customer Rating: |
| 18. |
|
Woodstock W2032 4-Inch by 20-Foot Clear Hose from WOODSTOCK Price: $31.95 Customer Review: If you are looking for a good quality, relatively flexible dust collector hose, this is it. The plastic is durable and easily fits over standard 4" vacuum connections. I have a Dewalt planer, Delta joiner and Rigid table saw and had no problems sliding the hose over any of them. One note, if you are... |
Customer Rating: |
| 19. |
|
PSI Woodworking D50C 4-Inch by 50-Feet Clear Flexible Dust Collection Hose from PSI Woodworking Price: $55.44 Customer Review: I don't know what all of the negative reviews are all about. This hose isn't the thickest hose on the market but it doesn't puncture that easy either. I haven't had any problem with this hose and doubt I will. And the price is just too good to pass up. |
Customer Rating: |
| 20. |
|
DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector from Delta Price: $699.99 Customer Review: Well, now that this collector is up and running, it works as well as I had hoped. However, a word of caution: apparently there are a number of these units on the market at about $100 less than the lower prices through other retailers (which is why I bought it through Amazon). My 50-760 arrived a bit... |
Customer Rating: |
1 - 20 |
|
| Portions © Amazon.com, Inc. |
